how to get rid of brown stains in toilet bowl

It is better to make your own cleaners at home rather than use chemical solutions to clean the toilet.

Safe and secure methods for cleaning the toilet:

Keeping toilets clean is essential, but it is often delayed. A dirty toilet has a horrible appearance, an unpleasant odor, and encourages germ growth. Cleaning the toilet, however, prevents further unpleasant situations as many everyday tasks are not enjoyable.

If you are in a hurry, it is best to clean the toilet bowl first.

As a result, if dirty water spills around the bowl when cleaning the toilet bowl, no other part will get dirty again. The toilet brush can be used to remove any visible stains or mineral deposits. The brush must be pressed on some stains in order to remove them. Pour some cleaning powder on the surface and spread it with a brush.

how to get rid of brown stains in toilet bowl

Lid cleaning:

The main parts of the toilet need to be cleaned after you have cleaned the toilet bowl.

To clean both sides of the toilet lid, use special cleaners for all surfaces / old paper towels (or disposable sanitary napkins).

Use an old toothbrush to clean stains between the lid and the body of the toilet, as well as the hinges, if necessary.

Quickly wash the toilet body:

It’s time to turn on the porcelain toilet. Use a spray bottle to spray the cleaner on all surfaces outside the toilet. To clean the china and the toilet handle more carefully, use an old paper towel.

You can also soak an old or paper towel in a cleaning solution or warm water and rewash it if it gets dirty. Firstly, clean the highest point of the toilet – this way, if dirty water or cleaning fluid is spreading around, you will only have to clean the points you haven’t yet cleaned.

Make sure to clean areas that are not easily visible, such as the toilet base and the back of the water tank. Use special cleaners for tubes or toothbrushes, and finally, use a siphon to clean these areas.

Cleaning the toilet siphon:

There should be a noticeable difference in the cleanliness of your toilet. If dirty water has collected in the toilet bowl, use a siphon to remove it. If you have used toilet paper when cleaning the toilet, pulling the siphon is an excellent way to eliminate this extra material, ensuring that nothing is blocking your toilet.

Wash your hands after removing gloves as a precaution. Some dirty water may splash into gloves while cleaning.

Using a damp sponge, clean the toilet:

Cleaning can be done with hot water. Using hot water and dusting will make cleaning other toilet parts more comfortable. After wetting the sponge with warm water, wipe around the tank, lid, seat, base, and outside of the bowl. It is often enough to clean the dust without using detergent.

The following points are essential when cleaning the toilet:

Wear waterproof gloves and plastic aprons:

Bacteria thrive in toilets. You should keep your hands and clothes as clean and dry as possible when cleaning.

The toilet cleaner should be used inside the bowl as follows:

Stains, rust rings, and mineral deposits on toilets can be cleaned with toilet cleaners. Allow the cleaner to enter the toilet water from both sides of the bowl by gently filling it from the edge.

how to get rid of brown stains in toilet bowl

Cleaning the chamber with cleaner:

It is often overlooked, resulting in the formation of brown minerals around the edge. Make sure you read the instructions provided by the cleaner you are using. Using many cleaners in a bowl of water before use will make them more effective. Take a short break before cleaning the toilet after placing them in the toilet so they will perform better.

Use a toilet brush to clean the bowl:

Clean the entire head of the toilet with a coarse toilet brush, removing any mineral stains along the surface of the water and the back of the toilet bowl. The more complete (and tighter) you brush the toilet bowl, the cleaner it becomes.

Here are some tips for making the most of your toilet cleaner:

As these materials accumulate in the toilet bowl’s surface water, rinse the brush several times in this water so that you have more cleaner to clean your toilet.

Pulling the siphon:

The toilet bowl and brush will be cleaned by draining the siphon. Make sure to continue brushing your toilet with the siphon water flow, as it will not be enough to clean all the dirt on your toilet. Continue brushing and siphoning until the stain disappears if stubborn and persistent stains persist.

To brighten the toilet, use these home and natural cleaners:

The tea tree:

The antibacterial properties of tea tree oil are used in this disinfectant solution to kill the microbes in the toilet bowl and on the surface of the toilet. This solution is very suitable for use in a family environment because the ingredients are inexpensive.


Baking soda, half a cup
White vinegar in a cup
Tea tree oil half a teaspoon

How to use:

White vinegar and essential oil should be mixed in a spray bottle. This mixture should be sprayed inside the toilet bowl, the seat, the edge, and the handle.

After applying this cleaner, let it sit for a few minutes. Brush the toilet bowl after adding baking soda powder. Clean the toilet seat, edge, and handle with a clean, dry cloth.

How to make a durable home toilet cleaner:


Borax in three-quarters of a cup
White vinegar in a cup
Essential oil of lavender ten drops
Lemon essential oil, five drops
Combine all ingredients in a spray bottle.

Pull the siphon or wet the bowl around the bowl with a toilet brush to wet the toilet bowl inside. All solution should be emptied into the toilet. Overnight or for a few hours, let the solution sit in the toilet bowl. Using a brush and siphon, clean the toilet bowl.

When the cleaner is in the toilet bowl, do not use it.


Distilled water in a cup
Baking soda half a cup
Olive oil soap in half a cup
A few drops of essential oil (lavender, grapefruit, tea tree, lemon, or orange)
Peroxide of hydrogen

Fill a bottle with water, olive oil, soap, and essential oils. Add baking soda to this mixture. Mix these ingredients in the bottle by shaking it. Clean the inside of the toilet bowl with the cleaner.

Let this cleaner sit in the toilet bowl for at least 15 minutes. Use a toilet cleaner brush to clean the perimeter of the toilet bowl. Before rinsing, spray both sides of the toilet bowl with hydrogen peroxide to disinfect.

In most cases, the ingredients are not thoroughly combined. The ingredients should be mixed well before use by shaking the bottle vigorously. As a slurry cleaner, this toilet cleaner can also be used.

Baking soda’s abrasive properties make it an excellent cleaner for cleaning tiles and grout.

Cleaning products for bathrooms and toilets at home:

The ingredients are:

Baking soda half a cup
Crystalline sodium carbonate, half a cup
Liquid olive oil soap in half a cup
Tea tree oil 25 drops
Lemon essential oil ten drops
Peppermint essential oil ten drops
White vinegar in two tablespoons

In a medium bowl, combine baking soda, crystalline sodium carbonate, and liquid olive oil soap. Mix thoroughly with the essential oil. To this mixture, add white vinegar. Clean the desired surface by removing some of the mixtures with a sponge.

Cleaning toilets with homemade effervescent tablets:


Baking soda, one and a third cups
Citric acid in the amount of half a cup
Water in a teaspoon
30 drops of lavender
30 drops of peppermint oil
30 drops of lemon oil

Combine baking soda and citric acid in a small bowl. Mix water and essential oils together.

You can reduce the boiling properties of baking soda by spraying the liquids on dry materials. You can test the concentration of this cleanser by spraying some on your hands. Water can be added if you feel sticky.

Pour some of the mixture into each of the empty holes in a silicone mold. After a few hours, let the mixture dry. The toilet flush tablets should be removed from the mold. Toss one of the pills in the toilet when needed and let them handle the rest.

Leave a Reply