Proper Cleaning Method for Dishwasher Filter + video

Dishwashers are a convenient household appliance that saves time and effort in cleaning dishes, pots, and pans. However, to ensure their proper functioning and longevity, it is important to clean their filters regularly. The dishwasher filter is responsible for trapping food particles, debris, and other contaminants, preventing them from clogging the dishwasher’s spray arm and damaging the appliance. In this article, we will discuss the proper cleaning method for dishwasher filters.

 

How to Deep Clean Your Dishwasher :

 

Step 1: Locate the Filter

Before cleaning the filter, it is essential to locate it. The filter is usually located at the bottom of the dishwasher tub, underneath the bottom rack. Some models have a single filter, while others have multiple filters. Consult your dishwasher’s manual to determine the location and type of filter in your appliance.

 

 

Step 2: Remove the Filter

Once you have located the filter, remove it from the dishwasher. Depending on the type of filter, you may need to unscrew it or twist it counterclockwise to remove it. Be sure to handle the filter carefully, as it may contain sharp or pointed objects.

Step 3: Rinse the Filter

Rinse the filter under running water to remove any visible debris or food particles. Use a soft-bristled brush to gently scrub the filter and remove any stubborn debris. Do not use a hard-bristled brush or abrasive cleaner, as it may damage the filter.

Step 4: Soak the Filter

After rinsing the filter, soak it in a solution of warm water and mild detergent for 10-15 minutes. This will help remove any remaining debris and sanitize the filter. Do not use bleach or other harsh chemicals, as they may damage the filter.

Step 5: Rinse and Dry the Filter

After soaking, rinse the filter under running water to remove any detergent residue. Shake off any excess water and allow the filter to air dry completely before reinstalling it in the dishwasher. Do not use a towel or other cloth to dry the filter, as it may leave lint or fibers on the filter.

Step 6: Reinstall the Filter

Once the filter is completely dry, reinstall it in the dishwasher according to the manufacturer’s instructions. Make sure the filter is properly secured and tightly screwed or twisted into place.

Here are some additional tips to help maintain the cleanliness and effectiveness of your dishwasher filter:

Clean the filter regularly: Depending on the frequency of use, it is recommended to clean the dishwasher filter at least once a month. This will prevent food particles and debris from building up and clogging the filter.

Pre-rinse dishes: To minimize the amount of food particles and debris that end up in the dishwasher filter, it is a good practice to pre-rinse dishes before placing them in the dishwasher.

Use the appropriate detergent: Using the appropriate detergent for your dishwasher can help prevent residue buildup and clogging of the filter. Consult your dishwasher’s manual for the recommended detergent.

Run hot water before starting the dishwasher: Running hot water for a few minutes before starting the dishwasher can help dissolve any remaining food particles and debris in the dishwasher.

Check for damage: Regularly inspect the dishwasher filter for any signs of damage, such as cracks or breaks. Replace the filter immediately if any damage is found.

 

Conclusion

Cleaning the dishwasher filter is an essential maintenance task that should be performed regularly to ensure the proper functioning and longevity of the appliance. By following the steps outlined in this article, you can effectively clean your dishwasher filter and keep your dishwasher running smoothly. Remember to consult your dishwasher’s manual for specific instructions and safety precautions before attempting to clean the filter.